Customer requirements
At the animal feed plant, agricultural raw materials are processed into flakes. Steam is used for wetting, heating and preliminary heat treatment before flaking, during the flaking process, and for drying after flaking.
The plant needed a boiler system that would supply steam to these production stages and fit within the available space. The long, narrow area available for the boiler room made the layout of the boiler and auxiliary equipment one of the project’s main engineering considerations.
Selected solution
The process steam demand was met by an ENORPA Kuvars Tek Külhanlı steam boiler with a steam output of 1,500 kg/h and an operating pressure of 8 barG. The boiler uses coal and pellets with stoker feeding.
The boiler supplies steam for preparation before flaking, the flaking process itself, and drying after the process.
ENORPA’s scope of work
ENORPA designed the boiler room to suit the long, narrow geometry of the available space. The boiler, auxiliary equipment, steam lines and connecting ducts were designed, manufactured and positioned on site in accordance with this layout.
The boiler and surrounding equipment were considered together, allowing the system to be installed as a complete arrangement suited to the existing space.
Installation and outcomes
The Kuvars Tek Külhanlı steam boiler and auxiliary equipment were positioned to fit the plant’s long, narrow boiler room area. The installed system supplies steam for the wetting, heating, preliminary heat treatment and drying stages of the flaking process in animal feed production.