ENORPA

Central heating solutions for buildings and living spaces.

Let’s assess hot water boiler options for the central heating needs of apartment buildings, homes, workplaces and hospitals.

Product images: Hot water and high-temperature hot water boilers. These are not presented as reference projects in this industry.

Our approach.

Heating suited to the building’s use

Space heating demand depends on the building’s intended use and operating hours as well as its size. Living spaces in homes and apartment buildings, and areas with different uses in workplaces and hospitals, are assessed together. Let’s begin boiler selection with the building’s heat loss calculation and information about the existing installation.

Distributing heat with hot water

Water heated in a central boiler can transfer heat to rooms through radiators, underfloor heating, fan-coil units or suitable air heaters. Boiler selection must be compatible with the operating conditions of the existing distribution system. Let’s address the control and connection requirements of the different circuits within the project.

Building zones and operating hours

Heating demand in different floors, blocks or areas may not change at the same time. Zone control, operating schedules and seasonal load variations must be included in the operating plan. For buildings in continuous use, such as hospitals, let’s also assess maintenance and service continuity requirements with the facility management team.

Space heating and domestic hot water requirements

The space heating circuit and the preparation of hot water used at taps are separate requirements. If a shared heat source is being considered for both, a suitable heat exchanger or hot water storage heater system and simultaneous demand must be taken into account. Separate process requirements in hospital buildings, such as sterilisation, are addressed outside the space heating scope of this page.

Products to consider

Refurbishing an existing boiler room

Let’s review fuel options, the available boiler room space, and the existing pipework, flue and control infrastructure together. For a new building or refurbishment project, let’s define the scope of the boiler, auxiliary equipment, engineering, installation and service according to your facility’s needs.